The giftMy son bought me a WLToys V323 as a gift this holiday season. Great choice on his part - it isn't going to be better than the Blade quads I already own. But it's a size I don't own - being larger than my 525 quad build, and a configuration I don't have, being a hexacopter instead of a quadcopter.
First impressionsOdd gods, but the thing is huge. That was also my sons impression. It's 550mm between diagonal rotor hobs, which is over 50% larger than the Blade 350QX's 350mm between diagonal rotor hubs. Add in the huge styrofoam prop guards, and well - it's huge.
See for yourself. Here it is next to my 350QX:
Beyond that, I tend to avoid WLToys because they have miserable quality control. One of the front motors died about two batteries into it. The seems to be a common problem on this and other multirotors that use it's motors. Fortunately, they are the same for clockwise and counterclockwise rotors, and are cheap, especially in four-packs.
FeaturesIt's got a typical set of features for a modern multicopter from WLToys. In fact, it shares parts with the more popular V262, V333 and V353 quads - thought it does use more of them. That's all to the good.
Let's just take a quick look at them.
6-axis gyroscopeThis has the usual modern 6-axis gyroscope. It will hold a hands-free hover reasonably well. Not particularly great, but not bad for a multirotor without a GPS system.
Headless modeThere is a headless mode that can be accessed by holding down the video button. It works fine for a brief test, but reviews on other WLToys multirotors are that the hold direction drifts after a little while. The RTF transmitter beeps continuously when you are in headless mode, and was so annoying I couldn't stand to fly it that way for more than a few minutes.
FlipsWell, I've been told that flips are de rigueur these days, and yup, this one has them. It works, but you tend to lose a lot of altitude with the canopy on. I'm not sure why you'd want that feature on something that seems to be a camera platform, but it's one of the signs that this is a toy-grade copter.
CameraThis is also sold in an FPV format, and that it's a camera platform seems to pervade the design. It uses the same camera connections as the V959 and V2x2 multirotors and the V912 helicopter. Here's some raw footage that was filmed with a now three year old V959 camera on it, flying the Café Steamers mod.
MisfeaturesThere are some things about it that are either annoying or out-and-out misfeatures.
Battery trayThe battery tray wraps the battery pretty completely, leaving no way to remove the battery without pulling on one of it's cords.
Other attachmentsWhile the web sites that sell parts for WLToys aircraft list several other V959 attachments as being for this hex and other similar aircraft, that is a lie. The camera is the only attachment that will work on this. If you're not sure, check the flight control board to see if there are connectors labelled for the ones you're interested in.
Still picturesWhenever you take a still picture with it, it takes three - and then writes them out. On my old camera, this takes nearly 20 seconds, and it's easy to want more pictures before that amount of time has elapsed.
150 meter rangeThis is advertised as having a 150 meter range. I can see orientation on my 350QX at over 200 meters, so the V323 could easily be flown to beyond that distance. However, when it loses the radio connection, the motors just stop. This leads to it simply falling from the sky. Since the hex reconnects automatically, flying out of range can produce some heart-stopping behavior.
This failure mode is disappointing - and dangerous. Not having an altimeter means it can't make a controlled descent under those conditions, but setting the rotors to a slow descent should be possible. Likewise, without a GPS module it's going to get blow around by the wind - but that's true if it's in a free fall as well. This makes me worry about what will happen if someone flies it out of range of the RTF transmitter.
Flying the thingBut what everyone wants to know is how does it fly?
In generalThe color scheme makes keeping orientation hard. The only difference is the two red props on the front - everything else you see from the ground is black. Until you get some altitude, the center of the canopy and prop guards can hide the two red props.
At night, the white LEDs on the front stand out and can keep you oriented, but the other four LEDs are flashing different colors, which is distracting. The LEDs aren't visible from any distance during the day.
One thing I did find out is that it doesn't compensate for a malfunctioning rotor, so you don't get any extra reliability. This means that it being a hexacopter instead of a quadcopter is simply an oddity, other than how it changes the flight characteristics - so lets look at those.
The RTF transmitterIt came with a transmitter - I don't think it's available without one. Unfortunately, I found it a major pain to fly with the RTF transmitter. That has four rates: 40, 60, 80 and 100%. It starts out in 40% rate, and flew about like I'd expect it to - slow and stable. The yaw was unreasonably slow, though. I figured that was just because they lowered the yaw rate as well.
Turned out not to be so - the yaw rate wasn't any faster in 100% mode. On the other hand, the transmitter seemed to have a dead band around center on the cyclic control stick. Small motions were ignored, but giving it enough cyclic to actually moved caused it to jerk down in the direction you wanted it to move before it started starts moving.
60% was still painfully slow, and 80% had also had the dead band issues. I pretty much gave up on the RTF transmitter after the motor died, and set it up on my Walkera Devo10.
With deviationTxFortunately, this can bind with a Devo transmitter running deviationTx with an NRF24L01 module installed. All of the features but headless mode work, which I consider an improvement. I don't use such even if it works well, and tend to configure transmitters so it can't be used. Flip mode as a switch works - throw the switch, and it automatically flips at max cyclic movement until you turn the switch off.
The V323 flies much better with that transmitter. There is no dead band, and it responds smoothly at 100% rates. I do use some expo to make things a little less sensitive near the center. I can even get a tolerable yaw rate by configuring the rudder to a 150% rate.
It still isn't as responsive or stable as the 350QX - but it also costs about 1/3rd as much.
You can get my deviationTx config for this hex from my post on the deviationTx forums.
Update: The latest versions of deviationTx claim to have headless mode support. I haven't tested it. I also found a hardware problem in the RF module I installed to use with this aircraft. Fixing that extended the range from the roughly 150 meters that it gets with the RTF transmitter to further away than I can recognize orientation.
Without the canopyThe canopy/prop guards on this thing are huge. A common mod for the more popular V262 quad version is to take that off, and replace it with a small bit of plastic covering just the electronics.
I've done that, creating the Café Steamers version. This was done using the inner bowl from one of the Healthy Choice Café Steamers low calorie meals. The arms fit into the steam vents in the bowl. Cut a slot from the rim to the first line of vents for each arm, then a small cross in those vents to give them a bit more room, and it snaps on nice and tight. Add some red spray paint, and it's done:
With this on it, the hex is much more responsive. The automatic flips are nice and tight. It even has a noticeable punch out. To be fair, if you want it as a camera platform, it does tend to have a lot more wobble in the wind.
The orientation problems are also not nearly as severe, either at day without the lights or at night with them. I personally have problems dealing with just a collection of lights at a distance, but that problem is with my vision, not the hex.
And since people will want to know, I get about nine minutes of relatively gentle flight time - just flying circuits, some flips to test it, and maybe a punch out to start - in this configuration. That is with the lights on full time, but no camera attached.
My WLToys rantIf you've been reading for a while, you'll know I'm not a fan of WLToys. The issue isn't so much how their aircraft fly, since they generally fly nicely once you get them set up properly on a good transmitter, and some are clear winners. The issue is lack of quality control and customer service, and non-flight design issues.
The motor crib death on this hex is typical of my experiences with WLToys. Pieces regularly arrive dead or flaky or die before the end of the second battery, which shows that their quality control is pretty much non-existent. If you then try and get any support from them, that's equally non-existent. It generally falls to the store you bought it from - which is usually a trans-pacific discount supermarket.
The design issues - like the battery tray and the poor failure handling - are also typical of WLToys. Again, nothing that changes flight characteristics, but things that could be safety issues or create extra expense for you in the long run.